Valves

Close filters
 
  •  
  •  
from to
No results were found for the filter!
Safety Valves 3/4" NW10 - LORCH, calibrated
Safety Valves 3/4" NW10 - LORCH, calibrated
Safety valves from LORCH This series is produced according to DIN 3320 AD, according to A2/A4. The specified setting values are guaranteed and are very precise. Features: Thread 3/4". Nominal diameter 10mm Made of brass with CE-mark
€48.95 *
Safety Valves 1/2" NW10 - LORCH, calibrated
Safety Valves 1/2" NW10 - LORCH, calibrated
Safety valves from LORCH This series is produced according to DIN 3320 AD, according to A2/A4. The specified setting values are guaranteed and are very precise. Features: Thread 1/2". Nominal diameter 10mm Made of brass with CE-mark
From €44.14 *
Safety Valves 3/8" NW10 - LORCH, calibrated
Safety Valves 3/8" NW10 - LORCH, calibrated
Safety valves from LORCH This series is produced according to DIN 3320 AD, according to A2/A4. The specified setting values are guaranteed and are very precise. Features: Thread 3/8". Nominal diameter 10mm Made of brass with CE-mark
From €44.14 *
Safety Valves 1/4" NW8 - LORCH, calibrated
Safety Valves 1/4" NW8 - LORCH, calibrated
Safety valves from LORCH This series is produced according to DIN 3320 AD, according to A2/A4. The specified setting values are guaranteed and are very precise. Features: Thread 1/4". Nominal diameter 8mm Made of brass with CE-mark
From €35.73 *
Mini safety valves with male thread, adjustable
Mini safety valves with male thread, adjustable
Mini safety valve Safety valves are used to blow off non-toxic and non-flammable gases into the atmosphere to protect pressure vessels against overpressure. Features: with male thread Work pressure Adjustable not component-tested Body:...
From €8.91 *
Safety Valves - adjustable
Safety Valves - adjustable
Safety valves properties: with external thread Working pressure Adjustable with lock nut Material: brass
From €9.34 *
Membranes for vent valves
Membranes for vent valves
Membranes for vent valves Feature: Material: NBR 70 Temperature range min: -20 ° C Temperature range max: + 80 ° C
From €4.64 *
Drain Valves / Vent Valvee for compressors
Drain Valves / Vent Valvee for compressors
Drain Valves / Vent Valvee for discharge of the liquids and of venting of the compressors Feature: with male thread Sturdy wheel made of nickel plated
From €3.31 *
Needle valve with female thread, stainless steel
Needle valve with female thread, stainless steel
Needle Valve with both sides female thread Features: Stainless Steel AISI 316 made of Square material Temperature Range: -20°C up to + 230°C Working Pressure: up to 6000 psi (414 bar) No welding work required Seal: PTFE - Standard...
From €77.60 *
Vent Valves SELV1
Vent Valves SELV1
Vent Valves SELV1 Suitable media: compressed air Corresponds to the standard: REACH 1907/2006-2011/64/CE-PED 2014/68/UE – free of silicone Components and materials: Body brass nickel plated O-Ring PA6.6 Cover nickel-plated brass Membrane...
From €10.90 *
Viewed