|To 99||€2.06 *|
|From 100||€1.99 *|
Prices incl. VAT plus shipping costs
Delivery time 5 Workdays
- Order number: A08130620
Aluminium-Screw Packer HD 13x110
With Nipple H, assembled
- Material made of aluminum for high pressure compression up to 300 bar
- High thread stability enables tight screwing
- Very light weight
- With 2 rubber parts
- Dimension 110 mm x ø13 mm
- Sealing by 2 clamping rubbers each with 15mm separate from each other with steel disc
- Injection pressure up to 300 bar
Aluminum screw packer for injection.
Steel parts left after injection into the structure can lead to rust. When rust forms in the concrete, the structure of the concrete is attacked, so you often choose the aluminum screw packer for high-quality injection work. The main component of the injection aluminum screw packer is aluminum and a rubber sleeve. In a drilled hole adjusted to the injection packer diameter, the packers are clamped by means of the rubber sleeve. An advantage of the screw packer is the possibility of re-tensioning during the injection. The packers can be clamped either by hand with a key or mechanically (Poppnietsystem). Before bracing, it should be ensured that the compressive strength of the building material allows it to be braced. The injection device is connected to a nipple attachment on the injection packer, which also acts as a check valve.