
- Order number: A1710012476
Noise-reduced round jet nozzle for small-area and general applications.
Can be used both as a universal nozzle on blowguns and on stationary blowing systems, automatic blow-off lines.
As a robust all-metal nozzle also predestined for higher temperature ranges.
Features:
- Total length: 50 mm
- Thread length: 10 mm
- Nozzle outer diameter: 11 mm
- Hexagonal: 20 mm
- Heat resistance: 400 °C
- Material: aluminum
- Air duct insert: Aluminum
Special feature:
It is not possible to close this nozzle! At 6 bar inlet pressure, measured at the nozzle tip, it generates a pressure on the impact surface of well below 2.0 bar (measured on a reference surface of 30mm diameter).
The value thus complies with the American OSHA guideline 1910.242(b).
This guideline requires the use of a suitable chip shield (see part no. A04031510) when using compressed air nozzles. In addition, the usual personal protective equipment (PPE) is required for personal cleaning.
Caution. The cleaning of persons using compressed air is prohibited in Germany!
Article is delivered with MAFA marking. Customer marking available on request at extra cost.
The use of the product is the responsibility of the customer.