Flat Nozzle 875

Noise-reduced compressed air nozzle 875 with cylindrical external thread.

This low-noise compressed air nozzle is used for flat applications where a high blowing force is required.
In order for the noise-reducing nozzle to perform to its full potential, an adequate supply of compressed air must be provided.
Series 875 nozzles comply with OSHA guidelines. Further product information and variations available on request.

Applications:
Areas of application include cleaning, drying, cooling, sorting or transporting parts as quietly as possible, even over greater distances from the blowing point.

Fetaures:

• External thread 3/8".
• Total length: 100mm
• Thread length: 10mm
• Nozzle width: 29mm
• Nozzle thickness: 6mm
• Weight: 60g
• Heat resistance: 50 degrees C
• Material: epoxy resin, hard PVC, nickel-plated brass

For information on flow rates and noise levels, please refer to the table in the pictures.

Notice:
Pursuant to Art. 33 of the REACH Regulation, we draw your attention to the fact that the substance specified below is contained in this product or in its individual parts as a constituent in CuZn39Pb3 (Ms58 / material number 2.0401) with more than 0.1% by mass:
Material: Lead (Pb), CAS: 7439-92-1, EINECS: 231-100-4, List: SVHC Candidate List.
For parts made of brass and nickel-plated parts we claim the exemption according to Annex III of the Directive number 6c "Copper alloys containing up to 4% lead by mass".

The use of the product is the responsibility of the customer.