Fastening technology

Close filters
 
  •  
  •  
from to
1 From 2
No results were found for the filter!
GRIP PN10 ø172-516mm/EPDM
GRIP PN10 ø172-516mm/EPDM
Pipe connections ø172-516mm / PN10 / EPDM (NBR and Viton (FKM) on request) Connection: Metal pipes - Metal pipes, high tension-proof Flowing medium: Drinking water/wastewater/air/compressed air (oil-free)/solids -30°C up to 125°C EPDM HT...
From €351.05 *
GRIP PN16 ø64-374mm/EPDM
GRIP PN16 ø64-374mm/EPDM
Pipe connections ø64-374mm / PN16 / EPDM (NBR and Viton (FKM) on request) Connection: Metal pipes - Metal pipes, high tension-proof Flowing medium: Drinking water/wastewater/air/compressed air (oil-free)/solids -30°C up to 125°C EPDM HT...
From €103.53 *
GRIP PN25 ø21-290mm/EPDM
GRIP PN25 ø21-290mm/EPDM
Pipe connections ø21-290mm / PN25 / EPDM (NBR and Viton (FKM) on request) Connection: Metal pipes - Metal pipes, high tension-proof Diameter range: 172 mm Flowing medium: Drinking water/wastewater/air/compressed air (oil-free)/solids...
From €58.31 *
Pressing Plier PWZ DN4-8
Pressing Plier PWZ DN4-8
Mobile Crimping Pliers for hose applications of use PWZ Crimping Tools for mobile applications The PWZ series is designed for mobile use. In addition, with their hoses directly pressed on the object, which in tubes which are difficult to...
€571.14 *
Universal Pressing-tool UPS1, UPS2 and UPS3
Universal Pressing-tool UPS1, UPS2 and UPS3
The best universal hose presses UPS for pressing sleeves UPS Universal Hose Presses - the world's very successful - many thousands in use - with optional pressing jaws The Hose Presses Series UPS are in the low pressure area and can be...
From €1,184.65 *
Hand Pressing-tool UPJ1 and UPJ2 DN4-8
Hand Pressing-tool UPJ1 and UPJ2 DN4-8
Universal usuable for low pressure range - 6-Points-Pressing Designed specifically for small diameters Very flexible use, pressing very close possible to fittings UPJ1 - instead of second arm, with ground plate for table mounting...
From €687.82 *
Sleeves in steel zinc plated and AISI304
Sleeves in steel zinc plated and AISI304
Sleeves to compress the hose and fitting on the hose ends - for low-pressure hoses Material Stainless steel Sleeves, made of AISI304 1.4301 For requesting a quotation for special parts from about 10,000 pieces we need: • a drawing with...
From €1.55 *
Double hose clip made of plastic and aluminium
Double hose clip made of plastic and aluminium
Double hose clip made of plastic and aluminium for connection two parallel air-gas-oxygen hose
From €1.80 *
Hose clamps 2-parts, cast iron
Hose clamps 2-parts, cast iron
Hose clamps 2-parts with separate tongues according to DIN20039A High clamping strength - Clamping of the hose on all sides by the side of loose tongues PN16bar - malleable cast iron galvanized Clamping range 17 to 381mm
From €2.68 *
1-Ear-Clamps with insert ring in W1 and W4
1-Ear-Clamps with insert ring in W1 and W4
Technical Advantages: • Clamp can not loosen • High clamping-torque • Non-corrosive, especially Type W4 • Easy and fast assembling • Protection of the hose through Insert • Perfectly deburred to avoid injuries • Especially economical •...
From €0.49 *
2-Ear-Clamps in W1 and W4
2-Ear-Clamps in W1 and W4
2-ear hose clamps for robust, powerful connections Increased clamping range, compared to 1-ear hose clamps Quick and easy installation by the squint of a clamp assembly Connection can be achieved by squeezing opening with a side cutter...
From €0.36 *
1-Ear-Clamps in W1 and W4
1-Ear-Clamps in W1 and W4
1-ear hose clamps for robust, powerful connections Quick and easy installation by the squint of a clamp assembly Connection can be achieved by squeezing opening with a side cutter easy (terminal after not reusable) Reduced risk of damage...
From €0.14 *
1 From 2
Viewed