Industrial and workshop requirements

Close filters
 
  •  
  •  
  •  
  •  
  •  
from to
1 From 14
No results were found for the filter!
Polyamide seals, captive washers
Polyamide seals, captive washers
PA seal - captive washers The polyamide seals hold on to the thread by means of nubs, thus they do not slip off and do not get lost. Features: Material: PA6.6 self-retaining, captive Temperature range: -20°C to 80°C Colour: black
From €0.24 *
Polyamide seals OD23/ID19mm
Polyamide seals OD23/ID19mm
Seals Features: Pressure resistant and dimensionally stable Material: Polyamide 6, natural Temperature range: -40°C to +80°C
Content 10 piece
€3.90 *
Polyamide seals
Polyamide seals
Seals Features: Pressure resistant and dimensionally stable Material: Polyamide 6, natural For cylindrical male thread Temperature range: -40°C to +80°C
Content 10 piece
From €2.40 *
Measuring can with graduation, plastic HD-PE
Measuring can with graduation, plastic HD-PE
Measuring can with graduation, made of plastic, transparent polyethylen (HD-PE) Suitable for all types of liquids including acids and can be used in many areas such as industry or workshops Available in sizes 1liter - 2liter - 3liter -...
From €5.53 *
Spout with nut for measuring can MKP, plastic HD-PE
Spout with nut for measuring can MKP, plastic...
Flexible spout with nut for measuring jugs type MKP Made of HD-PE plastic
From €1.73 *
Measuring cup with graduation, plastic PP
Measuring cup with graduation, plastic PP
Measuring cup with graduation, made of plastic, transparent polypropylene Suitable for all types of liquids including acids and chemicals and can be used in many areas such as industry or workshops Available in sizes 0.1liter - 0.25liter...
From €38.91 *
Air-Pressure wash gun B645
Air-Pressure wash gun B645
MAFA Air Pressure Wash Gun B645 The performance of our air pressure washing gun is similar to that of high-pressure washing devices. Simply connect the washing pistol to the water line and to the compressed air line. Performance: Suction...
From €40.70 *
Wash gun for hot water to 90°C/194°F
Wash gun for hot water to 90°C/194°F
Wash gun/Water saving gun for hot water 50°C and shortly up to 90°C housing and handle with rubber insulation, fully coated, shockproof, innerparts made of stainless steel Suitable for food industry Female thread G1/2inch Nominal...
€162.79 *
Wash gun for hot water to 50°C/122°F
Wash gun for hot water to 50°C/122°F
Wash gun/Water saving gun for hot water up to 50°C housing and handle with rubber insulation, fully coated, shockproof, inner parts made of brass Female thread G1/2inch Nominal pressure 25bar/2.5MPa/360psi Flow rate: At 25bar approx....
From €57.83 *
Watergun for hot water to 90°C/195°F
Watergun for hot water to 90°C/195°F
18030009 Water gun for hot water Conical spray jet, adjustable by lever position. The jet can be changed from 0° to 60° by means of the adjusting screw Lockable handle, grease and alkali resistant, shockproof, no damage to floor...
€110.31 *
AISI316 Lift-Pump for 200l barrels
AISI316 Lift-Pump for 200l barrels
Lift pump made of stainless steel AISI316 for 200liter barrels Features: for agressive chemicals, solvents, de-greasers, etc. 840mm down tube and extension Barrel-Adaptor BSP 2" Teflon-seal
€216.58 *
Brass-ball valve lockable - Lever handle, FT/FT
Brass-ball valve lockable - Lever handle, FT/FT
Ball valve suitable for water, compressed air, vacuum (max. -0.98 bar), oils, fuels (5 bar max.), heating oil Features: Housing: nickel-plated brass ball: hard chromium plated brass seal: PTFE lever: zinc-plated steel manufactured...
From €18.31 *
1 From 14
Viewed
Company

Show all prices without VAT.

Private customers

Show all prices with VAT.