Products from MAFA-Sebald Produktions-GmbH

MAFA-Sebald Produktions-GmbH
Close filters
 
from to
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
1 From 65
No results were found for the filter!
AISI316 Lift-Pump for 200l barrels
AISI316 Lift-Pump for 200l barrels
Lift pump made of stainless steel AISI316 for 200liter barrels Features: for agressive chemicals, solvents, de-greasers, etc. 840mm down tube and extension Barrel-Adaptor BSP 2" Teflon-seal
€211.12 *
Bicycle nipple for tire filler with bicycle valve
Bicycle nipple for tire filler with bicycle valve
Bicycle nipple for tire filler, bent Material: Brass Connection thread: male thread M12x1.25 Version with bicycle valve
€8.47 *
Compressor connecting hose
Compressor connecting hose
Compressor connection hose 3/4inch - Hose length 15 meters Ready mounted with compressed air claw couplings size 3/4inch High quality compressed air rubber hose outer-ø30mm x inner-ø19mm
€76.73 *
Cavity hose with All-Around nozzle
Cavity hose with All-Around nozzle
Cavity hose with All-Around brass nozzle - for cavity preservation Hose connection: Swivel nut female thread G1/4" For all cavity spray guns with one connection - male thread G1/4" Flexible polyamide PA12 hose Hose total lenght...
€11.54 *
Cavity probe straight, ID-ø4mm, with Teflon tube, connector NW5 Typ21
Cavity probe straight, ID-ø4mm, with Teflon...
Cavity hose with hook probe straight, for professional conservation in the car repair shop or industry Version with Teflon hose - suitable for hot waxes etc. Total length 80cm long Hose diameter: outside ø6mm / inside ø4mm Special hook...
€35.90 *
Hook sonde ID-ø4mm with Teflon hose, plug NW5 Type21
Hook sonde ID-ø4mm with Teflon hose, plug NW5...
Cavity hose with hook probe for professional conservation in the car repair shop or industry Version with Teflon hose - suitable for hot waxes etc. Total length 80cm long Hose diameter: outside ø6mm / inside ø4mm Special hook probe made...
€39.38 *
Brass lance for diesel particulate filter cleaning
Brass lance for diesel particulate filter cleaning
Lance for cleaning diesel particulate filter Lance made of brass tube ADø3mm or ADø4mm - with 4 holes each ø1mm Total length 80cm (including PA12 hose and connector) Polyamid PA12 hose Ergonomic hand grip allows longer and more...
From €52.14 *
Cavity hose with slotted nozzle
Cavity hose with slotted nozzle
Cavity hose with slotted brass nozzle - for cavity preservation Hose connection: Plug nipple NW5 Typ21 for quick coupling For all cavity spray guns with one connection - quick coupling NW5 Typ21 Flexible polyamide PA12 hose Hose total...
€20.88 *
DPF-Hose with all-around nozzle
DPF-Hose with all-around nozzle
Hose with brass round nozzle for cleaning diesel particulate filter DPF Polyamide hose Brass all-round nozzle: 6 side holes all around each ø1,5mm, 1 front hole ø0,8mm Total length: 160cm (other variations possible on request)...
€20.30 *
DPF-Hose with nozzle changer
DPF-Hose with nozzle changer
Hose for cleaning diesel particulate filter - with replaceable conical plastic spray nozzle Conical plastic spray nozzle - easily exchangeable (can be ordered separately as spare part) - nozzle length approx. 50mm Polyamide PA6 hose...
€28.94 *
PVC-Hoses, transparen
PVC-Hoses, transparen
PVC-Hoses Fetaures: choose between 30 meter rolls and yard ware Food quality BS6066 USF & DA Burst pressure: 3 : 1 - Any increase in temperature can adversely affect the pressure resistance Applications: Drinks, Food, Water, Irrigation,...
Content 30 meter (€0.23 * / 1 meter)
From €6.96 *
reinforcing sleeve for PA-tube
reinforcing sleeve for PA-tube
Reinforcing sleeve The reinforcing sleeves are used, to prevent deformation of the tube. Features: Material: brass serves for the reinforcement of PA-tube when using cutting ring and compression fitting
From €0.13 *
1 From 65
Viewed